problems
I haven't heard of particular problems with these models.
If something happens there are always service points that might help
...ikely. However, siphon all gasoline out of the tank. Water in the gasoline can create all sorts of devilish problems.
Good luck....
...hey have offered absolutely no help whatsoever.....their response 'we work with our dealers to fix the problems' its been 3 months.....enough already!!!
high and dry...guess i've be...
Hey All,
i was just wondering if anyone has any problems with the pole of their Superjet (96 + Model). I have a 97 SJ and I just noticed that the bottom of the pole is somewhat loose.
What I m...
Bill, I think your on to something however, my experience with this particular model points to a different but related culprit. The intake tunnel is a large one piece insert that is sealed to the hull...
i ran ada on my 1200 gp no problems i have 1 on my gpr no problems
a buddy has riva so far 2 cracked domes and i believe the head was replaced 1 time also
Just check all the vital functions. You can't predict what's going to give you problems in future. If they're running smooth now there is no reason to assume they will give problems as ...
...PRO at site development but this site needs some help. As I have learned from the road of hard knocks, more problems are syntax mistakes. I would suggest looking at the code and testing the site befor...
It might be ignition problems.Sometimes when the coil heats up it will cut out.
Ficht is made by independent company so I see no problems.
Now I don't know if I should get one. Maybe, the XP. hmmm... How fast is the rxdi? Any engine problems?
Difficult to answer. All engine related problems are a bit complicated. Could it be erosion?
I use Mobil 1 Synthetic Gear Lube for pump oil and have had no problems.
My GTX is a dream. I had the same thing checked on mine because of a notice I received from Sea-Doo. No problems with it. Purrs like a kitten after 7 years.
Lee, My brother has been using Torco GP7 on his 97 GTX and 99 XPL without any problems.
Fercho
hi i just got a 93 polaris sl 750 its got problems is it werth it to fix it it has sand in the cilanders ex and pipes a hole in the number3 pisten 360.00 for partes is it worth it to fix it
...on your carbs.
As for the flywheel, how are we to know that you properly main- tained it to prevent any problems?...
...#039;m not mistaken your best bet is to get an intake mainfold from a 2001 model, sxi. That should end your problems. 310-782-2815 shop...
... ends. I ride this machine hard , mostly in salt water. from my personal observations you are going to have problems of one form or another with any machine. Bottom line with the XPL nothing really ri...
... I ride with. They all have larger sitdown machines and are constantly waiting on me to catch up. I have no problems with endurance, just with a slow boat. I have already purchased a pipe, flame arres...
All my toys have been Kawi's. And anytime I've had any problems Kawi' has always taken care of it. Not just a patch job but full replacement. And done right. Although I must say it is r...
...cyl ? second assuming everything else was ok and all you did was replace the pistons and rings and then the problems started.....it may very well be an air or water leak into the cyl , but did you che...
...e a handling problem with the Kawasaki 1100 back around 1996? Kawasaki built these skiis and they had major problems. You would ride and all of the sudden the ski would either go right or left and the...
We experienced the same problems with Blaine's SS. Because it was a different medley, it took the entire season. For us, the key was the billet set up. We changed pop-off, needle and seats, and j...
...he high-res version (Sea-Doo 800) but the low-is fine if you on a low-speed connection.
If you have any problems, give us a call in the morning, 8-5 EST. 877-330-0231
Bryan Glynn SBT IT Mgr....
...have no data to prove it.
It took about 1 and 1/2 hrs to install. It was well worth it, considering the problems I had with my catalytic converter before.
I still get my cat. con alarm after a...
...ook good when we got into the motor Look's like to much squish velocity for pump gas (causing allot of problems) .As for me it was a great day the Stx is running and running great. Take Care and ...
...ides. Delamenated.
The ski was fixed under warranty last winter. It has cracked again.
There are no problems with the dealer or warranty. The glass man at this dealer has a very good reputatio...
...ms to out of the PWC biz.
Well, A lot depends upon the rest of your engine set-up when it comes to deto problems, and it's not just the dome profiles. With a reasonable ignition advance curve...
... remember what that parts called) and then also build up the middle where the intake goes. I had air bubble problems but it worked out pretty good in the end. You can use and extra coating of epoxy as...
The Content on this site is provided for general information purposes only. Your use of the Content, or any part thereof, is made solely at Your own risk and responsibility. By entering this site you declare you read and agreed to its Terms, Rules & Privacy.
Copyright © 2006 - 2010 My Jetski Buddies |
TIP: Write your question in details [ why? ]
Latest Posts
|
more posts...