motor
I have this explorer and the motor is shot. A freind of mine has a 93 or 94 kawasaki 750 and I can buy the motor pretty cheap. Lets not concern ourselves with motor mounts yet and address the question...
will 91vxr motor mounts work in a 91 superjet
if he pickled motor as it sound,then what he has is just oil coming out of system.Allso when storing motor like that after flush (salt water)you can run motor 15 -20 sec. with out cooling water that h...
...Since I have been posting here for 3 years, I always used 'engine', but probably 80% use 'motor'. In the beginning, I wanted to post and correct this, but never did. I too was alwa...
The water regulator is in no way tied into the motor internally, and was not the reason his motor took a dump. Whoever the dealer is, it is a dealer he should stay away from.
Bill O'Neal
...some modification but nothing more than the average joe could handle ,, also someone put a bigger yamaha motor in one (not sure what ) but it was relativly easy .. I owned a wavjammer and at one time ...
got a problem with my HX ,when you start off from the beach, hot or cold, the motor 'burbles' and takes a few moments to 'clear out' before it runs fine with good throttle response...
...urning needs a semi wide area.. This ski will not turn on a dime unless you swing the back end out.. The motor itself is near indistructable with the abuse i but it through.. Only blew my motor once d...
... but it isnt connected to anything...
Anyone seen this? Any way to fix it without having to pull the motor out? Do i need to fix it? is the tank wedged in there well enougth to not need the straps...
...e spot where the threads are on the manifold breaks off. One of the intake manif ds that broke caused my motor to seize. I had a enough of that so time for some new carbs. I got a set of worx intake m...
...d 2 crack and break. First intake manifold that broke was under warranty and did no other damages to the motor. Second intake manifold that broke caused my motor to seize. Of course it was out of warr...
I am looking for a motor for my 96 XP any sugjestions please contact me.
Just received a new 951 motor w/ new updates F/S $1400
i have a polaris 150 pwc that needs a water pump. do i have to pull the motor to do that?
Is this a 650 motor. I may have some used cylinders and probably a piston.
Dave Hughes
...hey have been very good as far as customer service in the past for me and oher people I know. I had a X2 motor blow ( not just seize but lost the crank and ruined the case) they fixed it under warrent...
Hadn't got and extra 785 non ported motor sitting around have you? Brad
Before you buy.
did you have a doo alignment tool when you put the motor back in? Bubba
No, but I was thinkin of puttin a Kawasaki 440 motor in a Yamaha SUV hull.
1991 kawasaki jetmate 650 motor runs good,no trailer. first $600
what is a fair price for 96 seadoo GTS, with new motor and batt. (canadian) . saw one in paper to-day for sell,with trailer.
my superstock superjet uses 44 sbn's and delivers excessive fuel to the crank/cylinder when the motor is not running. anybody have a solution?
I have one in Killer GPR while the triples are off and it does well. No heat in motor compartment and can use regular Yamalube not the expensive synthentic. Installation took about one hour.
is there and one who offers caged bearing for the 951 motor/high quality ,maybe silver plated or titanium cage's? thanks chip de
I'm looking into buying this ski with a water logged and then rusted out motor. Just wondering for the sake of buying parts for it what years are compatable and anyhting someone thinks I aught to...
...e department. Otherwise if you start it and it has too much water in the compartment it will damage your motor....
yea must be operator error when the dealership mechanics have absolutely no explanation why a 951 motor completely dies while cruising across a bay at 35 mph....... PWCFRAZIER must be an idiot mechani...
There are cheater ways to do it, but if you have the motor out, it probably was to fix a problem. Spend the bucks and get it aligned properly. Same with rotary valve timing. It is worth spending a few...
I have a superstock superjet. I went to winterize the motor and found excessive fuel in the crank/cylinders. I am running stock 44 mikuni SBN's. Can anybody give me some advice. Last time I rode ...
... sit or stand model they produced them from 1986 to i believe 1995 it was only available with the 650 cc motor you can tow a kneeboarder or wakeboarder with it i know from experience it is a pretty co...
The Content on this site is provided for general information purposes only. Your use of the Content, or any part thereof, is made solely at Your own risk and responsibility. By entering this site you declare you read and agreed to its Terms, Rules & Privacy.
Copyright © 2006 - 2010 My Jetski Buddies |
TIP: Write your question in details [ why? ]
Latest Posts
|
more posts...